 |
 |
INCREASE
YOUR PROFITS BY 18%...
GUARANTEED
IT’S THE WAY OF THE FUTURE...Try
it, and you will not have it any other way.
By using our 6-foot duct, you will be connecting fewer joints, using less
hardware, cleats
and duct sealer, minimizing duct leaks and be more efficient by installing
more linear feet of duct per day, Thus you will reduce you cost and increase
your profits!
Rectangular ductwork can be shipped completely assembled to minimize field-assembly
costs. |
 |
INTRODUCING...
TRANSVERSE
DUCT CONNECTOR
(TDC™)
This is the ultimate and most economical method of air-tight duct connection
in the industry. The flanges are roll-formed directly onto the duct,
no flange material to handle, cut or waste. Start increasing you profits
today by using tomorrow’s flange (TDC™). |
|
DUCT
LINER THAT DOES NOT ITCH YOUR POCKET...
We utilize the highest quality duct liner that
has the following features:
 It
is impervious to dust and dirt. |
It
has low air flow resistance. |
| Does
not promote microbial growth. |
It
resists damage. |
 All our duct liner is attached with 100% adhesive coverage.
Pin fasteners are weld-secured
and unsurpassed in holding power. They become part of the duct, unlike mechanically
secured pins that may not survive the handling stages of the duct.
|
 |
YES...
WE CAN FABRICATE 5-FOOT DUCTS.
Our fully automated fabrication equipment enables us to process 5-foot and
6 foot ducts
simultaneously, quickly and on schedule while still maintaining our rigidness
in plant
quality control procedure. We have the highest quality galvanized material
in stock
ready to meet your needs-whatever they may be, including TDC™ flange, slip
and drive and raw joint, also Pittsburgh, Snaplock and welded
seams, plain or sealed. |
CUT
TO FIT YOUR NEEDS...
Our
fabricated system will fabricate ducts according
to your specifications whether it is the type
of joint, seam or specific gage. Pro-Fab
Sheet Metal, Inc., will also provide
you with joint
and center holes for you tie rod reinforcement
at no extra cost to you, if required. |
 |
|
 |
SEALED
LIKE NO OTHER...
Our
Pittsburgh and Snaplock sealant is nontoxic,
flame-retardant and will not shrink even under
severe temperature.We
can apply sealant to your seams at no extra cost
to you, if required.
Rectangular ductwork can be shipped completely assembled to minimize
field-assembly costs.
|
|
Download
Duct Order Forms Here
|
|
| |
SHEET
METAL AND
AIR CONDITIONING CONTRACTORS'
NATIONAL ASSOCIATION
Providing products and information related to the HVAC and sheet metal industry,
including technical manuals and guidelines.
Also promoting the unmatched expertise of SMACNA Contractors.
Sheet Metal Workers International Association
|
| |
|
